WPC Solid Plain Door

WPC Solid Plain Door

WPC Wood Polymer Composites is a great material. Known as WPC door, this product fetches attention and become one of the favorite materials for the architecture, interior designer, project engineers, and contractors. Wood gets damaged with water, moisture, termite attack, etc and we have no option to save it. Rajvi WPC Doors are complete substitute of Wooden Flush Door & UPVC Doors. Our WPC Doors are supported by well-established quality assurance department. We possess technologically advanced machineries and equipment to maximize the production of WPC Doors.

Our WPC Doors are made from superior quality of Wood Polymer Composite (WPC) which is one of the strongest polymer compositions of WPC Industries. The Greatest advantages of our factory made door is its natural resistance to extreme environments which makes it a class apart from the other types of ordinary doors.

Available Size (MM) :-

  • 25 mm
  • 28 mm
  • 30 mm
  • 35 mm

Available Length (Inch) :-

  • Width : 26", 28", 30", 32", 34", 36", 38".
  • Length : 75", 78", 81" 84".

Rajvi WPC Solid Plain Door Features :-

Applications of WPC Solid Plain Door

  • Main Door
  • Bedroom Door
  • Living Room Door
  • Bathroom Door
  • Toilet Door
  • Office Door
  • Partition Door
  • Industrial Door
  • Pre-Fab House Door


Rajvi WPC Door doesn't require Special tools to work. Only Conventional carpenter's tool will sufficient for work and Process.

  • Recommended Tools: Drilling machine, Hacksaw Blade, Saw, Hammer / Mallet, Pliers, Snips, Chisel and Woodworking square.
  • Recommended Adhesive: Cement Solvent Adhesive (WPC to WPC), Silicon Based Adhesive (WPC to Laminate), Silicon Based Wood Adhesive (WPC to Veneer).
  • Recommended Accessories: Screws, European Series Hinges, L-Hinges / But Hinges / Ordinary Hinges and Wax Filler.

Technical Property for Rajvi WPC Door Frames

Technical Properties Index
Material Wood Polymer Composite (WPC)
Material Composition PVC, Wood Powder, CaCo3, Other Additives
K Value 57 - 60 (Suspension Grade)
Material Density 570 - 650 Kg/cm3
Water Absorption Ratio ≤ 0.5%
Tensile Strength ≥ 11 (MPa)
Surface Shore D Hardness 0.55 to 0.70 (g/cc)
Elongation strength ≥10 (MPa)
Elongation rate of break ≥15
Impact strength of free beam ≥10 (kjm2)
Softening Point ≥70 (C°)
Charpy Impact Strength ≥ 15 (KJ/M²)
Flexural Strength ≥ 15 (MPa)
Compressive Strength at 10% Deformation > 3.0 (MPa)
Thermal Vicat Softening Temperature ≥ 75 (Cº)
Thermal Vicat Deflection Temperature @ 1.8 MPa 60 (Cº)